Drive Shafts for the 6×6 Beast

Question about Drive Shafts for your RC4WD Beast II 6×6 Truck Kit?

The Beast II contains 3 Scale Nylon Short Punisher Shaft (89mm-120mm) 5mm Hole (Z-S0583) as seen below:

Screen Shot 2015-11-09 at 10.13.16 AM

Please note that one of the three shafts is customized to be a bit shorter than the rest to fit between the small space between the rear axles.

For more information on what products are included in the Beast II you can look at the replacement details here:

Replacements Parts:

  • Dual Spring 80mm Scale Black Shocks (Ver 2) (Z-D0039)
  • Triton Transfer Case (1:1) (Z-U0029)
  • Yota II Ultimate Scale Cast Axle (Front) (Z-A0080)
  • Scale Nylon Short Punisher Shaft (89mm-120mm) 5mm Hole (Z-S0583)
  • Yota II Ultimate Scale Cast Axle (Rear) (Z-A0081)
  • Yota II Ultimate Scale Cast Axle (Center Rear) (Z-A0010)
  • R3 Scale 2 Speed Transmission (Z-U0025)
  • Metal Drive Coupling for Trail Finder 2 (Z-S0599)
  • Gelande 2 Front 3 Link & Panhard Mount (Black) (Z-S0794)
  • Gelande 2 Rear 4 Link Mount (Z-S0795)
  • Drag Link for Gelande 2 (Z-S0810)
  • 70mm (2.75″) Aluminum Link for Gelande 2 (Z-S0819)
  • 59mm (2.32″) Aluminum Link for Gelande 2 (Z-S0807)
  • Rebuildable Super Punisher Shaft (111-136mm, 4.37″-5.35″) for Axial SCX10 Rear/Wraith Front 5mm Hole (Z-S0884)
  • 52mm (2.04″) Internally Threaded Aluminum Link (Black) (Z-S1084)
  • M3 Medium Straight Plastic Rod End (20x) (Z-S0399)
  • M3 Short Bent Plastic Rod End (20x) (Z-S0402)
  • M3 Mini Plastic Rod End (20x) (Z-S0398)
  • M3 Offset Short Plastic Rod End (20x) (Z-S0401)
  • MIL-SPEC ZXL 1.9 Tires (Z-T0075)

Optional Parts:

  • Hammer Transfer Case (1.47/1) (Z-U0024)
  • Scale Steel Punisher Shaft V3 (3.56″-4.35″ / 90.5mm-110.5mm) 5mm Hole (Z-S0826)
  • King Kong Mini Tow Shackle (Z-S0075)
  • FlashPoint 1.9 Military Offroad Tires (Z-T0082)
  • Humvee Single 1.9 Internal Beadlock Wheel (Z-Q0018)
  • MIL-SPEC ZXL 1.9 Single Tire (Z-P0056)
  • Punisher Shaft II (90-120mm, 3.54″-4.72″) 5mm F-350 Hi-Lift (Z-S0522)
  • Scale Steel Punisher Shaft (100-130mm) 5mm (Z-S0209)
  • Scale Steel Punisher Shaft V3 (3.56″-4.35″ / 90.5mm-110.5mm) 5mm Hole (Z-S0826)
  • Rebuildable Super Punisher Shaft (100mm-118mm, 3.94″-4.65″) 5mm Hole (Z-S1261)

 

Still have questions? Please email us at support@rc4wd.com for additional support.