Link Size vs Rod End Size

Please note that you will want to check the size of the threaded shaft (threaded Set Screw) on your links. Once you know that size (M2, M2.5, M3), you will want to match that with the rod end size. For example, M3 link will require M3 Rod End.

After that, you will need to identify what length you need.  Most of these are measured from the base of the Rod End to the top of the rod end near the ball.  

screen-shot-2016-12-29-at-3-09-09-pm

Still have questions? Please email us at support@rc4wd.com for additional support.