I just picked up the 1/14 Scale Earth Mover 870K Hydraulic Wheel Loader (VV-JD00013) and when I turn on the Flysky Radio, I instantly get a “SWITCH ERROR”. What do I do?
First off, congratulations on your new Earth Mover! This is a simple fix. To start the radio, all the switches need to be pushed back towards the rear/back of the radio (Opposite of the Control Sticks) (Photo attached for reference):
Just turn off the radio (with your battery unplugged from the Loader), move all the switches to the rear of the radio and then turn the power back on.
NOTE:
- RED Arrows indicate that those switches need to be pushed towards the rear of the Radio.
- Blue Arrows indicate that those switches need to be pushed up towards the antenna.
Still have questions? Please email us at support@rc4wd.com for additional support.